Whirlpool WHES30E Review {Updated April 2024}

In the market for a Whirlpool WHES30E? A water softener softens water by removing the minerals that cause the water to become hard. Water that has a high level of magnesium and calcium is known as hard water and causes several problems in your household. It results in scale build-up inside the pipes and clogs them. Hard water doesn’t support soap and detergent dissolving and leaves behind soap spots in clothes.

A high-quality water softener can solve the hard water problem in your home. A water softener is designed to remove positively charged ions and reduce the negative impacts of hard water. The Whirlpool WHES30E 30,000 grain water softener is one of the best products on the market today. This article provides a comprehensive review of the Whirlpool WHES30E water softener.

Whirlpool WHES30E

Design And Installation

The Whirlpool softener is great for households that require a moderate amount of water. It’s highly recommended for households with up to 4 people since the unit can remove up to 8 ppm of ferrous iron deposits from hard water. This product is certified by the National Sanitation Foundation and meets the rigorous standards of the institution.

The Low Salt Light technology determines how much salt/water is required to regenerate and provide soft water to your household. The product will use only the minimum amounts of water and salt in the process and result in significant salt and water savings.

Anyone with a basic knowledge of tools can install the system in his/her home due to the DIY installation kit that comes with the softener. It helps reduce plumbing costs in the process. The product comes with a one-year warranty for parts and labor. You can extend the warranty to a lifetime one as per your requirements.

The 6th sense technology helps automatically turns on or off the sleep mode when salt levels are running low. The digital display design makes it much easier to use the softener. Once you set up the unit according to your desired settings, the softener will do the rest.

Value For Your Money

The WHES30 is a single tank softener that is quite inexpensive compared to similar products in the market. The 30,000-grain capacity offers plenty of clean water for small to medium-sized households. It provides excellent quality water to make your shower better and prolong the life of the appliances in your home.

The interface of the unit is intuitive and simple. You can easily control the regeneration cycle. The unit has sensitive buttons so that you don’t have to jam your fingers to operate the unit. The system regenerates soft water on demand helping to save on resin and salt in the process.


The Whirlpool 30,000 Grain softener has the capacity to remove water hardness of up to 95 GPG (grain per gallon). In fact, it can also remove up to 8 ppm (parts per million) of iron deposits from hard water. But iron can easily stick to the surface of the resin and cause staining. It may lower the durability rate of resin beads over time.

The device can operate underwater pressure of 20–125 psi and manage a flow rate of 7 gallons per minute. It has a one-inch fitting so that you can easily install it into the existing plumbing lines in your home. The unit needs a 110V electrical outlet to operate.


The unit is quite easy to use and maintain. It requires very little maintenance compared to other products on the market today. You should clean the unit every four months to increase its efficiency and durability. You need to refill the salt once the low salt light comes on. It ensures there is brine at all times to avoid hard water passing through your pipes. Pellet salt with less than 1% impurities is recommended for this unit.

Whirlpool WHES30E Specifications

. Max clear water iron 7 ppm
. Maximum grain capacity 30,000 grains
. Maximum hardness 95 gpg
. Maximum salt efficiency 5,000 grains/lb
. Salt storage capacity 175 lb
. Valve size 3/4″
. Plumbing connection 3/4″ or 1″
. Height 43 3/8″
. Electrical requirements 110 / 120VAC with 24V transformer
. Regeneration time of day – adjustable
. Min-max water pressure 20-125 psi
. Min-max water temperature 40-120 F

Can You Install The Unit Outdoors?

Yes, you can install the WHES30E 30,000-grain unit outdoors as long as the unit isn’t exposed to rain, humidity, and freezing temperatures.


. High-performance and inexpensive water softener unit
. Salt saving technology
. Space-saving design
. Great value for your money
. Easy to install and use due to the intuitive display
. Ideal for small and medium-sized households with 4-5 family members
. High resin capacity


. Some users have complained that the display is unclear at times
. The backflush drain could leak when the unit isn’t installed properly

All in all, the Whirlpool WHES30E softener is capable of treating even the hardest water in your household. Easy installation and intuitive design are some of the great features of the product. Invest in the Whirlpool WHES30E water softener right now to eliminate hard water problems in your home.

Purchase the Whirlpool WHES30E Here

Leave a Comment