Pelican PC1000 Whole House Water Filter Review {Updated December 2023}

Pelican Water Systems is a Florida-based company that designs and markets a complete line of high-quality, branded water purification systems for the residential market. The company’s water filtration systems are amongst the most efficient on the market and are one of very few water purification brands approved by the National Sanitation Foundation (NSF).

Considering that there aren’t any governmental regulations for such products, NSF approval is one of the only things you can use to determine the quality and safety of such products. As such, you can rest assured that any system you buy from Pelican Water Systems is reliable and of good quality.

Pelican PC1000 Whole House Water Filter Review

As a water system’s manufacturer, Pelican has two primary whole house water filtration systems:


The PC600 – best for smaller homes that have anywhere from 1 to 3 bathrooms.
The PC1000 – better suited for larger homes and buildings requiring a higher flow rate. If you have 4-6 bathrooms, this is the model for you.

In this review, we shall be looking at the Pelican PC1000 Premium whole house water filtration system, its design, performance, features, specifications, and pros and cons amongst other things.

Just like the name suggests, the Pelican PC1000 is a purification system that’s designed to purify water for an entire home, providing users with clean and safe-to-use water on demand. The PC1000 is of the most efficient systems available on the market today – and with a reason. So, if you’d like to learn more about this whole house water filter, take a minute or two to read through this review.

The Pelican PC1000 Premium Whole House Water Filter Review

Specifications

Filtration stages: 4
Flow rate: 15 gallons per minute
Operating temperature: 36 to 120 degrees Fahrenheit
Operating pressure: 25 to 80 PSI
Tank media lifespan: 1,000,000 gallons
Warranty: 5 years
DIY installation: Yes
Filtration media: Copper and Zinc oxidation media, 2 x GAC media, 5-micron sediment prefilter

Design

There isn’t much to be said about this filter’s design except that it is a cylindrical tank that houses several components that are needed to purify/filter water (more on this later). And since it’s made out of steel, the product’s durability is guaranteed – plus, this choice of material gives it a nice industrial look. At the same time, it’s designed for easy installation, meaning that anyone with some plumbing experience can handle installation on their own. However, if you feel that you cannot install the filter by yourself, you always have the option to call in a professional and have them set it up for you at a small cost.

Features

When buying a whole house filtration system, one thing you need to consider is its dimensions. You want to make sure that the product you get will fit in the space you’ve set aside for it. One of the cool features of the PC1000 Premium Water Filter is that it’s quite compact, making it ideal for installation virtually anywhere in your house. When installed, the entire system has a width of about 11-inches and has a width of 21-inches, a depth of 19-inches, and a height of 60-inches.

The filter’s max flow rate is 15 gallons/minute and can withstand an operating pressure of anywhere between 25 and 80 PSI. It also comes with a sediment pre-filter that needs to be changed every 6 to 9 months depending on how dirty the water is! The PC1000 tank media, on the other hand, is designed to filter 1,000,000 gallons and has a 5-year lifespan.

The PC1000’s tank media is made out of stainless steel and is fitted with something known as an Up-Flow system that’s easy to use – no need for tools or any special instructions. This system has proved to be quite effective at removing chemicals and contaminants.

How It Works

The PC1000 filters water using multistage filtration media.

  • Stage 1
    In the media, stage 1 is represented by 5-micron sediment prefilters that eliminate debris, silt, and other sediments found in water. The main purpose of this stage is to protect fixtures and appliances and prolong their life. That’s why users are advised to replace their pre-filters every 6 – 9 months.
  • Stage 2 and 3
    Stage 2 and 3 of the process involve the use of Granular Activated Carbon Media. This combines various types of carbon to ensure all types of contaminants are removed from the water. These coconut-shell-based, high-grade, activated carbons are quite effective against dozens of chemical contaminants, detergents, industrial waste, soluble metals, VOCs, and many more. It’s also at this stage that industrial solvents, pesticides, herbicides, pharmaceuticals, chloramine, and chlorine amongst are removed.
  • Stage 4

Stage 4 involves the use of the Copper and Zinc Oxidation media, which helps prevent and reduces the growth of algae and bacteria. The system’s Up-Flow system directs water in a whirl from the tank’s bottom to its top; causing the carbon inside the tank to swirl too! Doing so helps improve/maximize purification results. Through absorption, the media absorbs all the chemicals present in the water, leaving it clean and safe for use.

As one of the best filtration systems on the market, the PC1000 Premium home filter is guaranteed to eliminate the following.

  • Sediment
  • Copper
  • Chlorine
  • Herbicides
  • Bacteria
  • Pesticides
  • Chloramines
  • Industrial solvents
  • Zinc
  • Pharmaceuticals
  • And other contaminants

Ease of Use

The good thing about the PC1000 house filtration system is that it comes with a straightforward installation guide that explains how one can quickly and effectively replace the media. While replacing the media is something any homeowner can do on their own, installation can be rather tricky. Nevertheless, it’s something that anyone with a bit of plumbing experience can handle as a DIY. As long as you follow the instructions provided, installing the filter shouldn’t be too much of an issue. However, if you aren’t comfortable handling the task yourself, then consider hiring a plumber and have them install the filtration system for you.

Pelican PC1000 Maintenance

The Pelican PC1000 Premier Whole House Filtration System requires periodic maintenance for it to operate optimally. Fortunately, maintaining the system doesn’t require much. As long as you remember to replace the system’s sediment prefilter, which costs $20/piece, at least every six months or so (depending on water quality and usage), you should be alright. Replacing cartridges regularly can help ensure that the system continues to perform as intended and extend its lifespan.

According to the company, the carbon media must be replaced every 5 years or after the system has filtered at least 1,000,000 million gallons of water. The good thing though is that this is something that you can do on your own, meaning you don’t have to hire a plumber and spend extra on labor. Carbon media costs about $300.

What Comes with the Pelican PC1000 Premium Whole House Water Filtration System?

The Pelican PC1000 comes with everything needed to install the system. Once the package has been delivered, you should expect to see the following things inside the box:

• Pelican Carbon Series pre-loaded and ready to install
• 5-micron poly-spun sediment cartridge
• Sediment Pre-Filter with mounting hardware
• Bypass Valve/Fittings
• Installation Guide
• O-rings, split rings, connectors
• Hose bib assembly
• Non-abrasive auto wax
• Housing wrench
• 90-day money-back guarantee

The Pelican PC1000 filtration system comes with a 12-year warranty for the tank and parts, a 5-year performance guarantee, and a 90-day satisfaction guarantee.

Pros of the Pelican PC1000

  • Inhibits bacteria growth
  • Minimal maintenance
  • No electricity or water waste
  • High-quality components
  • The system is NSF-certified
  • 4-stage filtration delivers safe-to-use water
  • Lifetime warranty for parts and tank
  • Lengthy performance guarantee

Cons of the Pelican PC1000

  • Does not filter fluoride
  • Does not have an indicator to alert you when it’s time to change the Sediment Filter
  • May need to hire a professional to install

Conclusion

Pelican Water Systems designed this filter with simple installation and upkeep in mind. Most of the people who’ve bought this product report that it’s easy to install, while some have said that they had to hire a professional for installation. The good thing about the Pelican PC1000 is that anyone with basic plumbing knowledge should be just fine installing the system by themselves.

As a POE (Point-of-Entry) system, the PC1000 is typically installed in water heater closets, garages, or basements and can even be installed outside as long as weather permits it – i.e., your climate never reaches below-freezing temperatures. Once installed, you should start to enjoy the benefits of clean, fresh water right away.

With the Pelican PC1000 Premium Whole House Water Filtration System, you’ll end up saving money in the long run – as long as you maintain the system. And while the filter doesn’t have any indicators to notify you when to replace filters and cartridges, it’s easy to tell when something needs to be replaced by checking water pressure. If you notice the water pressure is low that might be a sign that it is past the 9-month threshold and your need to change your Sediment Pre-filter. The Tank Media, on the other hand, only needs to be replaced once it has filtered 1,000,000+ gallons, or after five years. One of the benefits of choosing the Pelican PC1000 Premium Whole House Water Filter is that replacement costs are much lower compared to some of its competitors.

In our opinion, the Pelican PC1000 is currently the best whole house filtration system on the market for basic filtration and city water needs, which is why we give it a 4.5-star rating. To learn more about the Pelican PC1000 Premium Whole House Water Filtration System or to check the product’s current price, visit pelicanwater.com

Purchase your Pelican PC 1000 water filter system today! – Click Here

Leave a Comment