How to Reset Your Tyent USA Water Ionizer Filters: A Beginner’s Guide

In this post, we will discuss How to reset Tyent ionizer filters. Tyent USA water ionizers are some of the most popular models on the market. They have a place in many homes for their ability to produce clean, filtered water. However, these machines require regular maintenance and upkeep to ensure they are working properly.

One such required maintenance is resetting your Tyent USA Water Ionizer filters. This article will cover what you need to know about resetting your Tyent USA filters so that you can keep them running smoothly!

How to Reset Tyent Ionizer Filters

Each time you install a new water filter you will need to reset the filter program. Each Tyent model has its own procedures. You can look for your model below to find the instructions to reset your specific filter:

MMP 2505, MMP 5050, MMP 7070, TY2507 Series

Follow the below steps:

*Press and hold the SET button for 2 beeps, it will say “System set up mode” and the screen will change to a blue-white color.

Press the Filter 1 icon, it will say “Filter 1.”

Press the Filter 1 icon again, it will say “Initializing was performed.”

Press the Filter 2 icon, it will say “Filter 2.”

Press the Filter 2 icon again, it will say “Initializing was performed.”

*Touch and hold the SET button for 2 beeps, it will say “Set up was complete.”

NOTE: After installing the new filters water coming from the machine may be blackish in color for the first 30-40 seconds. When the water clears it will be safe to drink. Next Flush filters for 2 minutes on the H2O cycle.

Models MMP 7070T, MMP 9090 TE, and MMP 11T

Follow the below steps:

Touch the Filter 1 icon, it will say “Filter 1.”

Touch the Filter 1 icon again, it will say “Initializing was performed.”

Touch the Filter 2 icon, it will say “Filter 2.”

Touch the Filter 2 icon again, it will say “Initializing was performed.”

NOTE: After installing the new filters water coming from the machine may be blackish in color for the first 30-40 seconds. When the water clears it will be safe to drink. Next Flush filters for 2 minutes on the H2O cycle.

Model UCE 9000T and UCE 11T

Follow the below steps:

Touch F1 at Bottom of the keypad screen, Blue Reset Box Appears.

Touch F1 Box 1 time, it says “The first Filter”, touch again, it says “Initializing was performed.”

Touch F2 at Bottom of the keypad screen, Blue Reset Box Appears.

Touch F2 Box 1 time, it says “Second Filter”, touch again, it says “Initializing was performed.”

This completes filter Reset and readings will now be “0” percent at bottom of the screen.

NOTE: After installing the new filters water coming from the machine may be blackish in color for the first 30-40 seconds. When the water clears it will be safe to drink. Next Flush filters for 2 minutes on the H2O cycle.

Check out all of our Water Filtration Product Reviews

Leave a Comment